Pages

Thursday, 27 September 2012

Element 113 Concluded at Last

The search for superheavy elements is a difficult and painstaking process. Such elements do not occur in nature and must be produced through experiments involving nuclear reactors or particle accelerators, via processes of nuclear fusion or neutron absorption. Since the first such element was discovered in 1940, the United States, Russia and Germany have competed to synthesize more of them. Elements 93 to 103 were discovered by the Americans, elements 104 to 106 by the Russians and the Americans, elements 107 to 112 by the Germans, and the two most recently named elements, 114 and 116, by cooperative work of the Russians and Americans.

With their latest findings, associate chief scientist Kosuke Morita and his team at the RNC are set follow in these footsteps and make Japan the first country in Asia to name an atomic element. For many years Morita's team has conducted experiments at the RIKEN Linear Accelerator Facility in Wako, near Tokyo, in search of the element, using a custom-built gas-filled recoil ion separator (GARIS) coupled to a position-sensitive semiconductor detector to identify reaction products. On August 12, those experiments bore fruit: zinc ions travelling at 10% the speed of light collided with a thin bismuth layer to produce a very heavy ion followed by a chain of six consecutive alpha decays identified as products of an isotope of the 113th element.

While the team also detected element 113 in experiments conducted in 2004 and 2005, earlier results identified only four decay events followed by the spontaneous fission of dubnium-262 (element 105). In addition to spontaneous fission, the isotope dubnium-262is known to also decay via alpha decay, but this was not observed, and naming rights were not granted since the final products were not well known nuclides at the time. The decay chain detected in the latest experiments, however, takes the alternative alpha decay route, with data indicating that Dubnium decayed into lawrencium-258 (element 103) and finally into mendelevium-254 (element 101). The decay of dubnium-262 to lawrencium-258 is well known and provides unambiguous proof that element 113 is the origin of the chain.

Combined with their earlier experimental results, the team's groundbreaking discovery of the six-step alpha decay chain promises to clinch their claim to naming rights for the 113th element.

"For over 9 years, we have been searching for data conclusively identifying element 113, and now that at last we have it, it feels like a great weight has been lifted from our shoulders," Morita said. "I would like to thank all the researchers and staff involved in this momentous result, who persevered with the belief that one day, 113 would be ours. For our next challenge, we look to the uncharted territory of element 119 and beyond."

Sunday, 23 September 2012

Ten Unknow Facebook Facts - Interesting Facts

1. Al Pacino's Face Was on the Original Facebook Homepage


2. One Early Facebook Function Was a File Sharing Service



3. The First "Work Networks" Included Apple and Microsoft



4. Facebook's Hidden Easter Eggs



5. The Meaning of the Term Poke Has Never Been Defined



6. The Average Facebook User Has 130 Friends



7. There's an application to See what's on the Facebook Cafe Menu



8. Mark Zuckerberg Calls Himself a "Harvard Graduate"



9. California is Huge on Facebook



10. A Facebook Employee Hoodie Sold for $4,000 on eBay




Saturday, 22 September 2012

Facebook lets users view their searches in updated Activity Log

Facebook has rolled out an update to its Activity Log. Now alongside their Facebook activity, users can view their searches made on the social network in the log. The Activity Log on Facebook, as its name suggests, tracks a user’s activity on the site and has it promptly listed down. The log is only visible to the user and that goes for the searches feature. Users can delete searches by making appropriate selections on the inline control on the Activity Log. 

In an official post, Facebook adds that users will receive the update in a few weeks. To access it, users will have to go to the top of their profile, and then go to Search from the activity sorter.

Activity Log updated

Facebook recently launched its Shared Activity plugin, using which users can control the activity they share to Facebook straight from the web app. In its official post announcing the launch, Facebook’s Andrew Chen wrote, “The Shared Activity plugin lists a person's activities published from your app to Facebook including Open Graph activities, Like button stories, and comment plugin activities. For example, when an individual uses a music app, she could modify the privacy settings, through the plugin, for specific song listening activities, without needing to go back to Facebook to control what's shown. Similarly, if a person, through a travel app, likes a restaurant or reviews a hotel, and decides that these activities should only be viewable to a select group on friends on Facebook, he can control this within the plugin as well.”

Recently, Facebook was in the news for having decided to make a “huge attempt” to erase fake profiles from its network. By doing so, it aimed to discourage the misuse of such fake profiles. As per a statement by Facebook, the social network may go as far as asking users to identify themselves (their presence on the network), if Facebook found it suspicious.

Last month, Facebook cracked the whip on fake ‘Likes’ on its Pages. Facebook affirmed that it would be coming down strongly on fraudulent Likes on Pages. The social networking giant opines that when a page and a fan connect on its platform, it needs to be ensured that the connection involves a real person with genuine interest in knowing more about and hearing from that particular Page. "As such, we have recently increased our automated efforts to remove Likes on Pages that may have been gained by means that violate our Facebook Terms," Facebook added in its post titled 'Improvements To Our Site Integrity Systems'.

Wednesday, 19 September 2012

"No scientific evidence" that cell phones are harmful


It's a common fear: cell phones are giving us cancer! Despite several studies assuring that there are no health risks associated with cell phone use, it's a fear that just won't go away. The latest study gets right to the point: "There is no scientific evidence that low-level electromagnetic field exposure from mobiles phones and other transmitting devices causes adverse health effects."

A comprehensive, 200-page study by the Norwegian Institute of Public Health looked beyond mobile phones to all wireless networks. A popular argument when discussing the dangers of cell phone use is that electromagnetic radiation from mobile devices can damage human cells and possibly cause cancer. But the Norwegian study found that the electromagnetic fields generated by mobile phones are all below thresholds recommended by the International Commission on Non-ionising radiation protection (ICNIRP). Those thresholds are set to be fifty times lower than the minimum value of electromagnetic radiation required to cause heating of human tissue or stimulation of nerve cells.

So cell phone radiation is below the danger threshold, but what about damaging effects even at those low radio levels? To quote the study: "The group found no evidence that the low-level fields around mobile phones and other transmitters increase the risk of cancer, impair male fertility, cause other reproductive damage or lead to other diseases and adverse health effects."

The Norwegian Institute of Public Health cites an influential Danish study in discussing possible cancer risks of cell phone use. The massive, 18-year study looked at 360,000 cell phone users and found no evidence of increased cancer rates.

It is unusual to find scientists so certain of their findings. The scientific community usually hedges their language when discussing studies so as not to overreach their data. But the Norwegian Institute of Public Health claims "the risk assessment has negligible uncertainty."

Sunday, 16 September 2012

4 Things that MICROSOFT Could not Explain!

TRY this….

MAGIC #1

Found that nobody can create a FOLDER anywhere on the Computer which can be named as “CON”.
This is something funny and inexplicable?
At Microsoft the whole Team, couldn’t answer why this happened!

TRY IT NOW, IT WILL NOT CREATE A “CON” FOLDER

MAGIC #2
  • For those of you using Windows, do the following:
  • Open an empty notepad file.
  • Type “Bush hid the facts” (without the quotes).
  • Save it as whatever you want.
  • Close it, and re-open it.

Noticed the weird bug? No one can explain!

MAGIC #3
  • Again this is something funny and can’t be explained?
  • At Microsoft the whole Team, including Bill Gates, couldn’t answer why this happened!
  • It was discovered by a Brazilian. Try it out yourself?
  • Open Microsoft Word and type =rand (200, 99)
  • And then press ENTER And see the magic?..!
MAGIC #4
  • Did you know that a flight number from one of the planes that hit one of the two WTC towers on 9/11 was Q33N.
  • In Notepad / WordPad or MS Word, type that flight number i.e Q33N.
  • Increase the font size to 72. Change the font to Wingdings. ….. u will be amazed by the findings!!!

Wednesday, 12 September 2012

Cannondale’s CERV bike dynamically adjusts to changing terrain

The CERV concept bike dynamically adjusts the position of the headset based on the terrain being covered

The curved drop handlebars long found on racing bicycles are pretty nifty, right? If you want to get down low to reduce your wind resistance you grab hold of the lower part, and if you’re climbing a hill and need to get a bit more weight and leverage on the crank you can shift your grip to the top bar. The Continuously Ergonomic Race Vehicle (CERV) concept bike takes things a step (or two) further with a design that dynamically adjusts the position of the handlebars based on the terrain being covered, all without changing the seat-to-crank height.

Developed into a working prototype by Ohio-based Priority Designs, the CERV is based on a concept from Cannondale that called for a design that allowed the handlebars to move up and down without altering the distance from the seat to the crank. The answer was a triangular frame with 100 mm (3.9 in) of travel up and down that moves in relation to the front end’s 85 mm (3.3 in) of travel forward and back.

The position of the CERV's headset can be lowered or raised to match the terrain being covered without altering the seat-to-crank height

When descending a hill, the CERV's front end moves forward and down to give the rider a low profile, while climbing a hill it moves up and back for a more upright rider position – on flat ground, the handlebar position is somewhere in between. The movement of the front end meant that a traditional fork wouldn’t be possible, so the Priority Designs team opted for a single-sided swing arm, which removed the traditional front fork altogether.

The CERV's saddle

However, you’ve probably noticed that the front fork is also handy for translating the steering movements of the handlebars to the front wheel on most bikes. With perfectly straight bike routes a rarity, Priority Designs built a mechanism that translates the steering movements from the handlebars to the front wheel through the bike’s frame. Similarly, the chainless bike translates the movement of the crank to the rear wheel via a transmission running through the shaft of the rear support arm.

The CERV concept bike is chainless

The CERV concept bike was unveiled at the Eurobike exhibition in Germany at the end of last month. The chances of it appearing on a road near you anytime soon seem remote.

Source: Priority Designs

Synthetic materials set new world record for greatest amount of surface area

Researchers at Northwestern University, Illinois, have broken a world record in the creation of two synthetic materials, named NU-109 and NU-110, which have the greatest amount of surface areas of any material to date. To put this into perspective: if one were able to take a crystal of NU-110 the size of a grain of salt, and somehow unfold it, the surface area would cover a desktop. Additionally, the internal surface area of just one gram of the new material would cover one-and-a-half football fields.

 MOFs are composed of organic linkers held together by metal atoms, and this results in a molecular cage-like structure like the above model of the NU-110

The NU-109 and NU-110 synthetic materials belong to a class of crystalline compounds referred to as metal-organic frameworks (MOFs). MOFs are thought to hold considerable potential as vessels for the transport and storage of natural gas, catalysts, and other sustainable materials chemistry.

The Northwestern University team, led by Omar Farha, research associate professor of chemistry in the Weinberg College of Arts and Sciences, synthesized, characterized, and computationally simulated the behavior of the NU-109 and NU-110 MOFs. The materials were analyzed using the Brunauer-Emmett-Teller (BET) theory and found to measure 7,000 m2/g. This means that one kilogram (2.2 lb) of the new material contains an internal surface area which could cover seven square kilometers (2.7 square miles) – the highest surface areas of any porous material on record.

The scientists gained access to the heretofore unreachable high surface area of the porous NU-109 and NU-110 MOF materials by removing the solvent molecules which were previously trapped within the materials' pores. This was done with the use of a carbon dioxide activation technique, which gently removed the solvent and avoided damaging the MOF materials.

The researchers believe their work may lead to yet further advances in MOF research and they aim to eventually exceed double the current surface area of the NU-109 and NU-110 materials. In order for this to happen, the design of MOFs will require altering on the molecular level: MOFs are composed of organic linkers held together by metal atoms, and this results in a molecular cage-like structure. Therefore, the team propose to use more space efficient linker types in the material’s design.

A paper describing the findings titled “Metal-organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?” was published August 20 in the Journal of the American Chemical Society and the new MOF-designing and synthesizing tech is currently being commercialized by NuMat Technologies.

Source: Northwestern University

Honda develops new technology to weld steel and aluminum together

Although some engineers have had success in spot welding steel and aluminum together, it has largely been considered impossible to achieve reliable, continuous welds directly between the two dissimilar metals. That changed last Thursday, however, when Honda Motor Company announced that it has devised a technique for doing that very thing. The results, which include lower vehicle weight and better performance, can be seen in the 2013 Accord.

A diagram of an Accord subframe made using the new welding process

The Honda team developed a variation on Friction Stir Welding, in which metals are joined via mechanical pressure – it's the same technique that has been used for experimental steel/aluminum spot welds in the past. As Honda explains it, “This technology generates a new and stable metallic bonding between steel and aluminum by moving a rotating tool on the top of the aluminum which is lapped over the steel with high pressure.” The welds that result are reportedly as strong or stronger than those made using regular Metal Inert Gas welding.

Steel/aluminum subframes built with the new technique are said to be 25 percent lighter than those made entirely out of steel, which should translate into improved fuel economy. The process also made it possible to alter the structure of the subframe, so that the mounting point for the suspension could be relocated – this change has reportedly increased the rigidity of the mounting point by 20 percent, and thereby improved the car’s dynamic performance.

A diagram illustrating Honda's variation on Friction Stir Welding

Additionally, the new process uses about half the amount of electricity as Metal Inert Gas welding, and the machinery it requires isn’t as large as that traditionally used for Friction Stir Welding – in fact, it can be attached to an industrial robot. The technique can also be used for aluminum-to-aluminum welding, without any hardware changes.

A new non-destructive inspection system, incorporating an infra-red camera and a laser, is used to check all of the steel/aluminum welds.

Source: Honda

Sunday, 9 September 2012

Nikon D7000 Review

The DSLR product refresh cycle in the recent past has gathered momentum at least for the entry-level DSLR cameras. However, the models for the more serious amateur and beginner-professionals are refreshed less often. Canon and Nikon are the biggest competitors in this field and both have competing products at different price brackets.

 Large connectivity options on the left side

The Nikon D90 was one of the most popular DSLRs of its time and there have been quite a few models since then. The D7000 is a replacement to the D90 and there are the expected set of improvements made to it and it’s been around a while. Nikon has since then moved on to a newer naming convention - the D40X was replaced by the older D3000 and the D90, with the D7000. 


Design

When you first look at the D7000, you can’t help, but notice the similarities between it and the D90. They appear identical in dimensions. It’s clearly larger than the entry-level D3100 DSLR, if you’ve seen one of those, it’s also quite a bit heavier. The texture on the camera gives you a sense of confidence when you hold it, unlike the more entry-level ones, which feel slippery. There’s quality everywhere - the buttons are designed to last a while - they’re chunky and can handle some abuse.

Manual focus and VR controls on the lens

There are two jog dials, one at the front and one at the rear. The rear one flows smoothly, while the one at the front offers slightly more resistance. The lens too is large and has a good comfortable grip to it. The ergonomics of the camera are great, too. The large size means that the right hand grip has a deep groove in it, which makes holding the camera in one hand really simple.

Features
The Nikon D7000 has an upgraded sensor that offers the user 16MP image shooting capability, while the D90 used a 12.3MP sensor. All these cameras - the D90, the D7000 and the D300S are based on CMOS APS-C size standard sensors. The new sensor and processor allow the D7000 more breathing space, in terms of sensitivity as well - the ISO range is extended upto 6400 on the higher side for better low-light performance and on the lower-end is stretched to 100, which presumably should allow more detail when you have plenty of light.

Nikon bundles a 18-105 VR lens with the D7000 just as they did with the D90 back then. Of course, you have the option of buying just the body and choosing a lens of your choice separately. We’ve always been fond of the 18-105mm lens, though - it offers a good amount of flexibility and is all rounder in the past.

The 18-55mm bundled with the more basic D3100 and D5100 feel somehow limited offering roughly 3x optical zoom. Video recording was one of the cool new features of the D90 - it could shoot 720p video, the new D7000 is more up-to-date with its 1920x1080 recording capability, at 24 fps.

Now space for two memory cards

The D7000 adds two SD memory card slots, so you can shoot more and not have to shuffle between memory cards. There’s also the 3-inch display that’s handy while focusing during photo and video shooting. There’s also a top view display that lets you quickly access controls and settings without having to look back at the larger display over and over again. In terms of connectivity, there’s a mini HDMI port, a microphone in port and even one for an external GPS module. File transferring is done using the mini USB port, but if you buy an Eye-Fi capable card, you’ll be able to transfer data over Wi-Fi.

An additional ring for choosing shooting styles on the left

The controls are a bit more complicated. There’s the standard mode selection dial, which includes the PSAM (program, shutter priority, aperture priority and manual) shooting modes, along with a second dial that allows quick switching from the single shot mode to the burst modes, and so on. This is bound to be a tiny bit confusing at first, to any entry-level DSLR user. In the long run, however, switching to different shooting modes becomes simple. The primary mode selection dial has two settings reserved for customizable settings.

Pretty identical to the D90 on the rear

Operation is relatively simple like it was with the D90. The two jog dials make switching parameters and settings easy. The menu itself is colourful and self-explanatory. There’s also a neat little Help button on the side, which lets you get a quick brief of each feature. There’s plenty of firepower as far as effects and filters are concerned.

Video shooting is simple. The settings for the video recording appear in a separate camera menu, but the shooting can be started by simply pressing the dedicated video record button. There’s also a notch, which lets you turn on and off the Live View feature.

Performance
Focussing is quick, all thanks to the 39 focus points and 3D tracking features. The lens doesn’t work particularly well for macro shots, but playing around with the zoom helps you do the trick. There’s hardly any delay between you pressing the shutter release button and the photo being captured.

Image clarity and performance is fantastic. It performs very impressively across the ISO range, right from 100 to 6400. At ISO 6400, there’s visible noise, but the image is still very usable, especially when you resize the image. At lower ISO settings, such as 1600 and 800, the image is still pretty flawless. At 400 right down to 100, it’s pristine. Image colours are fairly natural and there are no clear issues visible.

The lens does a fair job, too - the image doesn’t distort much at maximum zoom. The zoom as we earlier mentioned is very usable and also great for getting portrait shots with even depth of field as well as shooting slightly distant objects. Burst mode is also quick. With ample amount of natural light, photos look rich in colour and well lit-up. Details across dark portions of the image are clearly visible. The lens along the renewed sensor makes for a very great overall package.

Outdoor shooting

A minute of video footage shot at 1080p at a frame rate of 24fps takes up 155 MB on the SD card. The file format used is MOV. The video quality is good and the camera manages to perform well even in low light areas.

Vibrant colours

Transition between dark and bright areas happens relatively fast. The only issue we noticed was while trying to focus. As the motor works to get the camera to focus, the noise from the motor is picked up by the microphone. 

Nikon bundles a 1900mAh battery with the Nikon, which Nikon claims to be able to shoot some 1,050 shots in all. There’s also support for a larger battery pack which can further improve the performance of the camera.

Verdict
The Nikon D7000 is really impressive in many ways. It has a few new features that make it superior than the D90 - primarily the larger resolution shooting and the 1080p video recording. Other than that, there are minor feature additions - nothing that would compel a D90 user to really upgrade.

 The replacement for the D90 is finally here

However, someone using a D3100 or D5100 or other cameras in the Rs. 25,000 to Rs. 35,000 price range would find this to be very good purchase, especially for slightly long-term purchase. Sure, you’re going to feel the pinch when you consider that the D7000 sells in India for a price of Rs. 72,700 in the market. This includes the standard kit along with the Nikkor 18-105mm 1:3.5-5.6G VR lens.

Also refer: Nikon D7000 Lenses

WHAT IS A PROCESSOR ? HOW THEY WORK ?


Every computer has a processor, whether it's a small efficiency processor or a large performance powerhouse, or else it wouldn't be able to function.Of course, the processor, also called the CPU or Central Processing Unit, is an important part of a functioning system, but it isn't the only one.
Today's processors are almost all at least dual-core, meaning that the entire processor itself contains two separate cores with which it can process information. But what are processor cores, and what exactly do they do?

What Are Cores? 


A processor core is a processing unit which reads in instructions to perform specific actions. Instructions are chained together so that, when run in real time, they make up your computer experience. Literally everything you do on your computer has to be processed by your processor. Whenever you open a folder, that requires your processor. When you type into a word document, that also requires your processor. Things like drawing the desktop environment, the windows, and game graphics are the job of your graphics card, which contains hundreds of processors to quickly work on data simultaneously, but to some extent they still require your processor as well.

How They Work ?

Fetch


The fetch step is what you expect it to be. Here, the processor core retrieves instructions that are waiting for it, usually from some sort of memory. This could include RAM, but in modern processor cores, the instructions are usually already waiting for the core inside the processor cache. The processor has an area called the program counter which essentially acts as a bookmark, letting the processor know where the last instruction ended and the next one begins.

Decode
Once it has fetched the immediate instruction, it goes on to decode it. Instructions often involve multiple areas of the processor core, such as arithmetic, and the processor core needs to figure this out. Each part has something called an opcode which tells the processor core what should be done with the information that follows it. Once the processor core has figured this all out, the different areas of the core itself can get to work.

Execute










Writeback

The final step, called writeback, simple places the result of what's been worked on back into memory. Where exactly the output goes depends on the needs of the running application, but it often stays in processor registers for quick access as the following instructions often use it. From there, it'll get taken care of until parts of that output need to be processed once again, which can mean that it goes into the RAM.

New Use for Those Incredible Nanotubes: Holograms

A holographic image of the word "CAMBRIDGE" generated using carbon nanotubes.

Carbon nanotubes — a manmade material many times thinner than a wavelength of visible light — can be used to create highly detailed holograms, researchers say.

These carbon tubes are hollow pipes only nanometers, or billionths of a meter, wide. They possess a range of extraordinary physical and electrical properties, such as being about 100 times stronger than steel at one-sixth the weight.

Industrial giants, government agencies and academic institutes worldwide are investigating carbon nanotubes as key ingredients for tomorrow's devices. This work includes researching a variety of applications regarding light — holograms, for instance.

Holograms are a special kind of 2D photograph that, when lit up, seem like windows onto 3D scenes. The pixels making up each hologram scatter light falling onto them in very specific ways, causing these light waves to interact with each other to generate images with depth.

The smaller the pixels making up the holograms are, the higher the resolution of the holograms and the more angles one can view them from.

"The size of pixels is one of the key limiting features in the state-of-the-art of holographic displays systems," said researcher Haider Butt, an optical scientist at the University of Cambridge in England.

Now scientists have created holograms using the smallest pixels yet — carbon nanotubes.

"Due to the nanoscale dimensions of the carbon nanotube array, the image presented a wide field of view and high resolution," Butt told InnovationNewsDaily.

The researchers used multi-walled carbon nanotubes — tubes within tubes — that were on average 140 nanometers across, or about 700 times thinner than a human hair. These were grown on silicon surfaces like pillars rising from the ground, each reaching about 1,500 nanometers high. Their calculations let them know where these nanotubes should be placed and how wide they should be in order to generate a holographic image of the word "CAMBRIDGE."

These holographic displays and their pixels are very sensitive to changes in material properties and incoming light. As such, "a new class of highly sensitive holographic sensors can be developed that could sense distance, motion, tilt, density of biological materials," and features of light falling onto them, Butt said.

While promising, carbon nanotubes are still expensive to fabricate, so the team is investigating other materials that could generate holograms in similar ways. "Alternative materials should be explored and researched,” Butt said. “As a next step, we are going to try zinc oxide nanowires to achieve the same effects."

Also, these holograms are static, much like photographs are. In the future, the researchers hope to make the adjustable pixels that could perhaps lead to changeable pictures or even video displays. This might be possible by integrating these pixels with the kind of liquid crystals often seen in modern flat-screen displays. The liquid crystals might be able to shuffle around the location and other features of the pixels, thus altering the holographic image they create.

The scientists detailed their findings online Aug. 31 in the journal Advanced Materials.

This story was provided by InnovationNewsDaily

HP unveils three Windows 8 machines

With the release of Windows 8 just around the corner, HP has unveiled two new touch-enabled Ultrabooks and a hybrid tablet/notebook

It's been over a year since Microsoft first previewed the next generation of its Windows operating system, the touch-optimized Windows 8. As we draw closer to release, it's now the turn of hardware manufacturers to reveal exactly what they imagine we'll be using to make the most of the rather impressive new operating environment. IFA 2012 provided the perfect platform and we managed to spend a little time getting to know the latest tablet, ultrabook, AIO and hybrid tablet/notebook offerings from Samsung, Toshiba, Lenovo and Acer. We've saved the biggest PC manufacturer until last and managed to jostle our way through the crowds of media and public to get up close to HP's first wave of Windows 8 machines.

Two new ENVY additions and a Spectre XT update have been chosen to represent the brave new world of touch-centric computing, including another dip into tablet territory (although HP did seem a little reluctant to use the "T" word, no doubt still feeling the pain of the TouchPad disaster).

A small connector interface in the keyboard base plugs into the tablet part of the device and two additional magnetic struts secure it in place

The HP ENVY x2 is a hybrid tablet/notebook or, if you prefer, a tablet that includes its own physical keyboard dock. The tablet features an optimized Windows 8 touch interface on an 11.6-inch, 1366 x 768 pixel resolution IPS multi-touch display panel with a reported brightness of 400-nit. There's also an optional stylus available for improved onscreen accuracy and to help keep grubby fingerprints on the glossy screen to a minimum.

The x2 has a mobile phone-like press-and-hold power button to the back – rather than the side – of the tablet part and a volume rocker over on the right, plus there's a Beats Audio logo in the bezel which signals the inclusion of Dr. Dre's and Jimmy Iovine's vision of how audio should be delivered, along with an HD webcam to the front and an 8-megapixel snapper round the back. On its own, the x2 tablet weighs a not-too-unpleasant 1.5 pounds (0.68 kg), which increases to 3.1 pounds (1.4 kg) when docked.

Docking and undocking from the keyboard is really smooth and easy. A small connector interface in the keyboard base plugs into the tablet part of the device and two additional magnetic struts secure it in place. It's released from the vice-like grip of the base via a magnetic toggle positioned above the comfortable chiclet-style keyboard. The base also includes its own battery for extended use, and benefits from an SD card slot, an HDMI output and two USB ports.

HP told us that although the company is still in the process of finalizing benchmarks for battery performance, users can expect a full working day in tablet mode or 1.5 days in notebook (docked) mode. The unit will come with 64 GB of SSD storage and includes a new HP Connected Photo app that syncs images across multiple devices, while also offering basic editing and social network sharing capabilities. Near Field Communication technology also features for content sharing between devices with a quick tap.

On its own, the x2 tablet weighs a not-too-unpleasant 1.5 pounds,and features an optimized Windows 8 touch interface on an 11.6-inch, 1366 x 768 pixel resolution IPS multi-touch display panel with a reported brightness of 400-nit

Up close, the aluminum finish lends the ENVY x2 a well constructed, stylish look and feel. The display is bright, crisp and responsive and the physical keyboard not too cramped. Both our intrepid product tester and the HP rep at IFA did seem to be having issues bringing up the Windows Charms menu bar by dragging a digit from the right of the screen, but this may have been a technique rather than a hardware problem.

The only information we were given about the processor in the tablet part of the hybrid notebook is that it's of the Intel X86 variety. It is also worth noting that the version of Windows 8 running on the x2 is the full version and not RT.

In the looks department, the HP Spectre XT TouchSmart Ultrabook may have MacBook Pro users crying foul at the general similarities but given HP's attention to detail and obvious build quality, perhaps that's not such a bad thing. This model sports a 15.6-inch multitouch Radiance Full HD IPS display with edge-to-edge glass. There's a Windows 8-optimized glass touchpad, backlit chiclet-style keyboard (that we found very comfortable to use) and tilted speakers with Beats Audio.

The new 17.9-mm (0.7-inch) thin, 4.77-pound (2.16-kg) Spectre XT is HP's first notebook to sport Intel's Thunderbolt I/O technology, and also includes two USB 3.0 ports, HDMI out and Gigabit LAN. It will be powered by the latest generation Intel Core processor with integrated HD4000 graphics, come with solid state storage, and will include full versions of Photoshop Elements 10 and Premiere Elements 10 to help satisfy any photo and video editing needs you might have. It will also be capable of charging USB-connected devices even when the notebook is powered off.

The new Spectre XT TouchSmart Ultrabook and the ENVY x2 from HP

The last of the three new Windows 8 products unveiled at IFA is the ENVY TouchSmart Ultrabook 4. HP has taken all of the best bits from the ENVY Ultrabooks launched earlier this year and added some multitouch magic. This 23-mm (0.9-inch) thin model features a 14-inch multitouch HD display, a backlit keyboard, up to eight hours battery life and a built-in subwoofer to make the most of the Beats Audio experience.

The latest Intel Core processors will run the show and system configurations will include solid state storage options, plus there will also be the option to include an AMD GPU with 2 GB of built-in video memory.

Only the SpectreXT has been given a firm release window of December 2012 with a starting price of US$1,399. The other two models can be expected in time for the holiday shopping season.

Source: HP



LED lantern runs on saltwater

Every now and again, a rumor crops up that someone has invented a motor car that runs on water. Sadly, that still remains a rumor, but Green House Co Ltd of Japan will soon be marketing an LED lantern that runs on saltwater.

The GH-LED10WBW is intended for use in emergencies, and for recreation

Given the catchy name of GH-LED10WBW, it’s presented as a saltwater lantern, but a magnesium/carbon lantern is more accurate and the design is simple compared to other saltwater batteries. The 680-gram (23.98-oz) lantern uses 16 grams (0.56 oz) of salt dissolved with 350 cc (11.83 oz) of water in a proprietary measuring bag and then poured into the lantern. The salt acts like an electrolyte in a simple wet battery, that uses a magnesium rod as an anode and a carbon rod as a cathode. The magnesium rod is replaceable because it is slowly destroyed by electrolysis as the magnesium ions travel to the carbon rod, generating electricity.

The 1.5 volts of DC power produced by the lantern is enough to run its ten-LED white light, which puts out 55 lumens of light. The lantern also includes a USB port to charge devices at 4.5 volts. The GH-LED10WBW runs for eight hours before the saltwater needs replacing, and the magnesium rod lasts 120 hours.

Marketed as an emergency lantern or for use aboard boats, it’s scheduled to go on sale in mid-September. No price has been announced.

Source: Green House Co Ltd

Wednesday, 5 September 2012

Smallest guitar, about the size of a human blood cell


The world's smallest guitar -- carved out of crystalline silicon and no larger than a single cell -- has been made at Cornell University to demonstrate a new technology that could have a variety of uses in fiber optics, displays, sensors and electronics.

The "nanoguitar" -- made for fun to illustrate the technology -- is just one of several structures that Cornell researchers believe are the world's smallest silicon mechanical devices. Researchers made these devices at the Cornell Nanofabrication Facility, bringing microelectromechanical devices, or MEMS, to a new, even smaller scale -- the nano-sized world.

Read more at: http://www.news.cornell.edu/releases/July97/guitar.ltb.html

Tuesday, 4 September 2012

7 Man-Made Substances that Laugh in the Face of Physics

The universe is full of weird substances like liquid metal and whatever preservative keeps Larry King alive. But mankind isn't happy to accept the weirdness of nature when we can create our own abominations of science that, due to the miracle of technology, spit in nature's face and call it retarded.

That's why we came up with...

#7. Ferrofluids

What do you get when you suspend nanoparticles of iron compounds in a colloidal solution of water, oil and a surfactant? Did you guess Zima? The real answer is ferrofluids, though you should be proud if you just knew what "surfactant" was.

A ferrofluid is a liquid that reacts to magnetic fields in trippy ways that make you think that science is both magical and potentially evil. They have multiple real world applications, many which are pretty badass, and none of which you will care about after seeing this:


Tell us that didn't look like the birth of the most sinister dildo ever.


What happens is that when a magnetic field is applied to the fluid, the particles of iron compound inside align to it. Once that happens, the fluid becomes a fluid-solid. That's right, ferrofluids are first generation T-1000s, only metallic black and thus 10 times as badass.

What the Hell is it Used For?

Ferrofluids have a lot of pretty mundane uses, from lubricating and protecting hard drives to providing heat conduction in speakers, but their primary use is in looking cool.


The ability to become solid or liquid with the application of a magnetic field also makes them perfect for computer assisted shock absorbers in Ferraris; NASA uses them for high-tech flight altitude assistance, and like a gyroscope in spacecraft. The Air Force uses their magnetic field absorbing properties to make aircraft invisible to radar and we like to think someday they'll be able to make super hot, futuristic robot dominatrices that we can store in a cup in the pantry when not in use.

#6. Aerogel

It's not the brick in the picture up there, it's the stuff under the brick. Aerogel, also called "Frozen Smoke," is very much like Ben Affleck's appeal: practically non-existent, but still there somehow. It is 99 percent air, with the other percent being silicon dioxide or fudge or whatever, and looks like fucking magic. Its structure makes it a piss-poor conductor and thus makes it an excellent insulator. In other words, aerogel is also fireproof.


In addition to being awesomely heat resistant, aerogel can also hold insane amounts of weight proportionate to the size of the aerogel being used, up to 4000 times, which shames regular air something fierce. To put it in totally nonsensical terms, if air had a party, while aerogel was busy getting hummers in the back, loser oxygen would be making sure everyone was using a coaster. That's how much cooler aerogel is. Fuck you, oxygen.

What the Hell is it Used For?


The suits astronauts use are filled with it to keep the cold of space from, you know, killing them. More transparent aerogels are being made to insulate windows, or the world's lightest ping-pong ball, as you can see in this clip at 0:36:



Every once in a while, science rules.

#5. Perfluorocarbons

Remember that scene in The Abyss, before you fell asleep, when Ed Harris was put in a diving suit that was filled with pink goo that he then breathed? It turns out James Cameron wasn't blowing pink goo-laced smoke up our ass; that stuff really exists. Perfluorocarbons are fluids that contain shitloads of oxygen, making it possible to breathe liquid. They originally tested it back in the 60s on mice, with a certain degree of success... sort of.
The mice ended up dying after being submerged in it for a few hours, possibly due to the gut wrenching horror of drowning, but not dying, while trying to scream in their tiny mouse voices. Rather than manning up to the fact that breathing liquid destroyed the mice's diaphragms, the scientists blamed the deaths on impurities in the liquid (most likely horrified mouse shit).

What the Hell is it Used For?


Aside from slow, tortuous rodent murder, perfluorocarbons are used for ultrasounds, and even artificial blood. But before you go out and fill your pool with some for a leisurely four-hour swim at the bottom, be aware they are also awful pollutants. The worst offenders have a half life of 50,000 years and warm the atmosphere 6,500 times more effectively than carbon dioxide, and God knows how many cow farts that would be. Supervillains of the world, we hope you are taking notes.

#4. Elastic Conductors
Odds are pretty good that some of you are reading this on an LCD screen while the rest of us are trying to make it out on the 13-inch monochrome monitor that came with our garage sale Commodore 64. But even with the LCD, some laptops still weigh over 10-pounds. And while that doesn't seem like much, the level of muscle atrophy experienced by the average Warcraft addict makes that weight a thousand times heavier. However, elastic conductors could fix that and make smuggling your porn collection into church even easier.
Also, oooohhh.

Elastic conductors are made of "ionic liquid" mixed with carbon nanotubes. We shrugged when we read that too, but scientists are very excited about it because you can run a current through it and it will stretch to double its original length, and snap back into place as if nothing happened. The point being you can wind up with the roll out, paper thin computer pictured above.

What the Hell is it Used For?

In addition to making screens that can be rolled up and stuck in our back pocket, a lot of scientists and doctors want to use elastic conductors to make flexible-lensed cameras... to be fitted to the back of the eyeball.

Girlfriends the world over will actually start recording their boyfriend's every word and guys at urinals will become infinitely more paranoid if they catch another guy's eye. On the plus side, the market for hidden camera porn will probably experience an unprecedented explosion in content.

#3. Non-Newtonian Fluids

A non-Newtonian liquid, in practical terms, is a liquid that turns solid when sufficient stress is applied. Like, say, the impact of feet:

They have the power to make dorks walk on water like Jesus (which is exceptionally cool for about the first 30 seconds of the video, and then sad for the remainder).


What the Hell is it Used For?
Our friends in the military want to use them for body armor. The idea is that the fluids will allow fabrics to be soft and supple, but harden on the impact of a bullet. It would be like wearing a Jell-O sweater that doubles as a bulletproof vest.

#2. Transparent Alumina
You may remember from Star Trek IV that Scotty orders some transparent aluminum so that they can steal whales for the future (it made a lot more sense at the time). Anyway, in the movie the material baffled the present-day engineers he described it to, since it's a miracle substance from centuries in the future.
In reality, transparent alumina has been around for a while. Originally, it was just boring old sapphires and rubies (both are transparent aluminum crystals), but as we have seen, mankind is not happy to let nature have the last laugh and we are now able to make transparent alumina, which is a clear metal that is as strong as steel. Our dreams of building Wonder Woman's invisible jet have taken another glorious step toward reality.

What the Hell is it Used For?

The military (again) wants it for see-through armor, probably so that every time a soldier standing behind a clear wall gets shot at and flinches in life-flashing-before-the-eyes terror, his buddies are justified for punching him and calling "two for flinching."

Also, something with lasers.

Transparent alumina could usher in a new world where windows deflect bullets, or airplane windows don't shatter when they hit a goose at Mach 4. The downside being that if they make car windows out of it, people who don't wear their seat belts will no longer live the dream of being "thrown clear" of the accident, and more likely wind up as "that guy whose nose shot out his ass."

#1. Carbon Nanotubes
These things are a miracle material that will someday power our homes, launch us into space, and make love to us whenever and wherever we want. That last one isn't planned yet, but it better be. Carbon nanotubes were the accidental leftovers of an arc-welder experiment, and they have nerds and scientists foaming at the mouth with their possible uses.

They are the strongest material ever found by mankind. Ever. Even stronger than Lou Ferrigno and he was the fucking Hulk, man. A hair-thick strand can bear the weight of an entire car, assuming it wouldn't cut straight through the chassis. Although that would possibly be even cooler than lifting a car with artificial hair.

There is the small, some might say major, issue that carbon nanotubes are only microns long, and pasting them together end to end has so far proven impossible. But physics can't hold back mankind, and recently a New Hampshire based company made a man-sized blanket out of nanotubes, showing that science will always say "Fuck you" to Mother Nature when she sets boundaries.

What the Hell is it Used For?

So far, they have managed to make super-small computer processors and low-resistance circuitry. In the future, all bets are off. Everything from tiny supercomputers to even tinier, super-efficient batteries, to more efficient solar panels to paper-thin materials that can stop a bullet, to freaking space elevators.

Sunglasses hinges that never break, toasters that get the toast right every time, TV remotes where the numbers don't wear off the buttons, ceiling fans that don't vibrate. Bags of chips that never get stuck in the vending machine. Carbon nanotubes will fucking solve it all.